ختم بلاط الترافرتين والرخام: دليل

Natural stones like marble and travertine are investments that add long-term value to your home. To protect them from stains, moisture, and wear, regular sealing is essential. Here is a step-by-step guide on how to seal your stone surfaces.

Why Sealing is Necessary

Both travertine and marble are naturally porous materials. Without a sealant, liquids like water, oil, and acidic juices can penetrate the surface, leaving permanent stains or causing damage. A high-quality penetrating sealer fills these pores, creating an invisible barrier.

Sealing Steps

1. Clean Thoroughly: Wipe the surface with a pH-neutral stone cleaner. Ensure it is completely clean and dry.

1. Apply the Sealer: Use a clean microfiber cloth or a lamb's wool applicator to apply the sealer evenly.

1. Let it Penetrate: Allow the sealer to sit on the stone for 15-20 minutes.

4. Wipe Excess: Buff away any remaining wet sealer on the surface with a dry, clean cloth. Do not let excess sealer dry on the surface.

5. Cure: Allow the sealer to cure for 24 hours before heavy use.

Regularly maintain your natural stone surfaces, whether it's Light Travertine or Burdur Beige marble.